Products
Navigation module MN-1

Specification

  • Azimuth angle 0…360° ±0,5°
  • Inclination angle 0…180° ±0,1°
  • Toolface angle 0…360° ±0,5°

Dimensions

  • Diameter 36 mm
  • Length 450mm

Applications

  • Log tools IN48, IN60, IN73, IN90

Technical characteristics

Packer slip is designed to work with non-explosive (hydraulically driven) landing nipples of NELN-82, NELN-100 type and explosive installation chambers.

HSP(ESP) is used to separate cased hole and tubings in exploration, operation and injection wells at pressures up to 150 MPa and temperatures up to 150ºC, filled with liquid or gas.

Packer has a cross in its structure, due to the cross the rotation of parts, when drilling out, is significantly reduced, the average drilling time is 6 hours when using junk mill.

Isolation bridge installed with HSP (ESP) is capable of withstanding for a short time (24 hours) an axial load equivalent to drop of pressure at least 600 atm. without additional cement grouting, and, subject to leak-proof landing, a drop of pressure at least 600 atm.

For long stay of isolation bridge in a well it is necessary to install additional cement bridge from the top, this operation is necessary, as over time, as a result of corrosion effect on packer slips, its sliding is possible. The height of the cement bridge is determined by the organization that determines further work on the well, taking into account downhole conditions and based on the purpose of the isolation bridge in the well.

Outer diameter,

length, mm

Weight, kg Casing inner diameter, mm Maximal drop of pressure, atm.
HSP(ESP) 82 82×436 9 88-98 500
HSP(ESP) 92 92×460 10.5 98-100 500
HSP(ESP) 97 97×460 11 104-114 500
HSP(ESP) 102 102×450 12 109-118 500
HSP(ESP) 110 110x 450 16.5 117-124 500
HSP(ESP) 118 118×475 21 125-133 500
HSP(ESP) 135 135×584 26 144-152 500
HSP(ESP) 146 146×573 31 154-164 500