Shutters are designed to work as a part of slurry bailer during the installation of cement bridges for isolation of productive horizons and wellbore sections during operation and repair.
Description
Shutters are designed to work as a part of slurry bailer during the installation of cement bridges for isolation of productive horizons and wellbore sections during operation and repair.
The design of the shutters is shown on the picture below.
Shutters consist of a hollow body threaded inside for the tubing joint, a clamping bolt screwed into the body, and a locknut.
The cavity in the body is made for glass membrane. Glass membrane dimensions are given in the table below.
The glass membrane (not supplied) is inserted into the cavity in the housing as shown in Fig. 1 and clamped with the clamping screw. The points of contact between the glass and the metal to put rubber gaskets (not included).
The explosive charge is placed in glass membrane.
At charge detonation in a borehole the glass breaks and clears the passage for cement slurry.

Technical data
| Shutters size | Dimensions, diameter-length, mm | Connection size | Weight, kg |
| 102 | 102х290 | Internal thread for tubing joint -73(2,5″) GOST 633-89 | 7,5 |
| 89 | 89х220 | Internal thread for tubing joint -73(2,5″) GOST 633-89 | 4,6 |
| 73 | 73х235 | Internal thread for tubing joint -60(2″) GOST 633-89 | 3 |

| Shutters size | Upper diameter of glass membrane, mm |
| 102 | 70 ÷ 75 |
| 89 | 43 ÷ 47 |
| 73 | 43 ÷ 47 |